Inert Gas Fire Suppression System
System Overview
Technical Specifications
Aurex Inert Gas systems are designed to detect & suppress fire automatically. The system uses naturally occurring gases like Nitrogen, Argon & Carbon Dioxide. The inert gas is stored in high pressure PESO/CE approved cylinders in gaseous form. In event of fire, the gas is discharged from the cylinder through a manifold, pressure regulator, piping and nozzles.
| Brand Name | AUREX |
|---|---|
| System Type | Total Flooding / Automatic Gas Flooding |
| Agents Supported | Inert Gases (IG-541, IG-55, IG-100, IG-01) |
| Storage State | Gaseous (High Pressure) |
| Compliance Standard | NFPA 2001, ISO 14520, PESO / CE Approved |
| Environment Impact | Zero ODP (Ozone Depletion), Zero GWP (Global Warming) |
| Extinguishing Mechanism | Oxygen Displacement & Heat Absorption |
| Storage Cylinder Capacity | 80 Ltr Cylinder |
| Working Pressure Options | 150 Bar / 200 Bar / 300 Bar |
| Safe for Humans | Yes (Safe for Occupied Spaces at design concentrations) |
| Electrical Conductivity | Non-conductive / Clean Agent |
| Residue After Discharge | Zero Residue (No cleanup needed) |
| Corrosion Risk | Non-corrosive |
System Components & Spares
The system is constructed with high-grade certified components and spares to ensure operation under high pressures and critical environments.
Key System Features
Operation Details
Upon fire detection, the electrical cum manual actuator releases the high-pressure gas. The pressure regulator ensures that the gas flow is controlled to a safe working pressure before it enters the discharge pipe and flows into the protected area via specialized distribution nozzles, dropping oxygen levels to a point where fire cannot be sustained.
Typical Applications
Inert Gas Fire Suppression Systems are ideally suited for protecting high-value assets and occupied environments where water, foam, or dry chemical powder might cause catastrophic damage to electrical systems or critical documents.